Language

SERVICE | COMPOSITE REHABILITATION SYSTEMS

PIPE WRAP-COMPOSITE REPAIR SYSTEM

REVOWRAP - REVOMAT - REVOCRETE

I

ntroducing Revowrap from CARBONTECH is an engineered composite solution used to restore damaged critical assets to the original design specification of the equipment.

Revowrap is designed to operate up to temperatures of 225C with no pressure limitations. The Revowrap epoxy resin system is specifically designed for the impregnation of our special woven bi-directional carbon fibre fabrics for pipe repair.

This systems can be applied by hand lamination, filament winding or by infusion methods and may be applied to live piping systems without shutting down for the repair. Revowrap may be applied to any pipe size, most substrates and almost any piping configuration including tanks, vessels, flanges, and other structural assets.

Revowrap provides re-enforcement of the piping in both the axial and hoop directions, and delivers uniform loading throughout the repair. Each repair is engineered using ASME PCC2 or ISO TS 24817 engineering codes for High risk non-metallic repairs. Carbontech engineers have the technology to perform FEA (Finite element analysis) on both the damaged piping systems and the Revowrap composite repair system.

REVOWRAP - FEATURES

Revowrap from CARBONTECH repair systems are custom engineered to function in specific site conditions.

FEATURES

  • Stronger than steel
  • Engineered solution with certified compliance and PR eng. Verified design calculations
  • External application without the need to isolate the processes
  • Extend design life of compromised assets
  • Eradicate unforeseen down time
  • Low tech installation requirements
  • Quick non-invasive installation
  • Can handle Complex piping geometries, bends, Tee's, vessels, tanks etc.
  • No Pressure limitations

ADVANTAGES

  • No Hot Work required
  • No heavy equipment required
  • Lightweight (No support systems required) (
  • High Temperature Resistance
  • High corrosion, acids and chemical resistance
  • Low Odour
  • Fast curing systems
  • High Tensile strength and modulus
  • High strength per $ invested
  • Does not mechanically breakdown under UV resistant
  • Trained installers compliant to ASME PCC2

TYPICAL USES

  • Internal Corrosion
  • External Corrosion
  • Weld Anomalies
  • Mechanical Damage
  • Support Abrasion on Piping Systems
  • Deteriorated Concrete or Rebar Corrosion
  • Complicated Geometries

TYPICAL INDUSTRIES

  • Offshore Oil Rigs
  • Petrochemical Plants
  • Refineries
  • Fertilizing Companies
  • Chemical Plants
  • Water Supply
  • Paper and Pulp
  • Sugar
  • Mining
  • Energy Plants
  • Transmission pipelines

-

  • -
REVOMAT - FEATURES

The Revomat from CARBONTECH is a durable, light weight, flexible temperature controlled silicone blanket. The blanket is designed for ease of use in field conditions.

FEATURES

  • Post curing on Pipe Wraps: (Elbows, Tee's, Straight-lines, Y-pieces
  • Post curing on patch repairs
  • Preheats
  • Resin Temperature Control sub-temperature field conditions
  • Heat Rate : 3°C p/minute
  • Amps : 16.6
  • Volts : 21
  • Watts : 350
  • Size : Various custom manufactured blankets available
  • Max Temp Range : 190°C
  • Bending Limit : r-25mm
REVOCRETE - FEATURES

The Revocrete from CARBONTECH is an engineered solution for the strengthening and rehabilitation of concrete, steel, masonry and even wooden substrates.

SITE CONDITIONS

  • Min Operating Temp : TBD
  • Max Operating Temp : 110°C
  • Maximum Pressure : N/A (
  • Minimum Application Temp : TBD

PHYSICAL CHARACTERS

  • Available Putty Systems : Yes
  • Epoxy Type : 2 Part Epoxy
  • Primer Colour : TBD
  • Core Material : Carbon Fibre

Qualifications and Compliances

  • Engineered Solution : Yes
  • ASME PCC2 Compliant : N/A
  • ISO TS 24817 Compliant : N/A
  • FEA Possible : Yes

-

  • -
OUR CLIENT